How to check to see if any channels on my 5.1 home theater reciever is blown? - 5.1 reciever upconverting
Is it possible that you or I could be doing something to check to see if I have an idea, maybe, I mean that I have a piece of a very nice Sony receiver later than my brother the exact same model and There is no problem only that its very quiet at times and others may be strongly idk, but it's a way to check to determine whether a channel is blown?
Tuesday, December 8, 2009
5.1 Reciever Upconverting How To Check To See If Any Channels On My 5.1 Home Theater Reciever Is Blown?
Subscribe to:
Post Comments (Atom)
3 comments:
The tone of "test" will get the answers that right on the mark to ... But even if all the speakers to the changes in "volume" problems can also check other things.
If not properly setup menu of the receiver set, then the film can not read properly ... You can tell that the recipient of the speakers you have, where they are and how big they are.
In addition, the receiver has separate volume controls for each speaker ... Changing this can affect the sound quality in his films ... The return of the center and rear speakers can help sometimes.
Finally, the Dynamic Range Compression "can make the difference in the world ... This option is in your receiver and DVD player ... If you turn shortens the distance, in volume between loud sounds and softest.
Test tones, there should be a key to the running test tones from each speaker sound
Yes, we should try the test tone. When you press the button or send it to each speaker static Outta if you see something you already know who hear not burned.
If you have problems, sometimes too quiet or too loud, and then the receiver can have an elegant tone. That is, they try to determine if things get hard on the screen, but often without a good sound. Shut down and enjoy.
Post a Comment